Hey,
I just received my Novak Mustang pickups and want to install them. But before I go digging around how complicated to change them is it? Is it a simple case of unscrew the existing ones, pull them out, de-solder the wires and re solder and install the new ones? Or is it a more involved job that I should get my guitar shop to do?
How to change Mustang pickups
Started by
andrew00
, Jun 03 2011 06:49 AM
1 reply to this topic
#2
HNB
-
- Members
-
- 1,895 posts
Senior Member R2
- LocationPuyallup
Posted 03 June 2011 - 09:02 AM
As long as there is just a hot and a ground wire it should be as you described it. You take the pickguard off, unscrew the old pickups, desolder the two wires from the switch of each pickup, screw on the new pickups and solder the wires were the old ones were.Hey,
I just received my Novak Mustang pickups and want to install them. But before I go digging around how complicated to change them is it? Is it a simple case of unscrew the existing ones, pull them out, de-solder the wires and re solder and install the new ones? Or is it a more involved job that I should get my guitar shop to do?
-[Christopher]-
Wanting to be someone else is a waste of the person you are. - Kurt Cobain
Wanting to be someone else is a waste of the person you are. - Kurt Cobain
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
