Looking for some help on a rewire
#1
Posted 31 March 2012 - 09:17 PM
#2
Posted 31 March 2012 - 10:10 PM
It is already wired that way. Top one turns the neck on or off and the middle one turns the bridge one on and off. To get both, you just turn both on.Hey everyone! I'm new around here. Anyway I've got a buddy who wants to rewire his Jaguar for a more conventional pickup selection. He just wants bridge, neck, and then a combination. I know I could toss a new switch in there to this easily, but I was wondering if there was anyway I could do this with the hardware currently in the guitar. Can anyone help me out?
Wanting to be someone else is a waste of the person you are. - Kurt Cobain
#3
Posted 01 April 2012 - 08:10 AM
#4
Posted 01 April 2012 - 10:28 AM
Wanting to be someone else is a waste of the person you are. - Kurt Cobain
#5
Posted 01 April 2012 - 11:29 AM
#6
Posted 01 April 2012 - 08:01 PM
Ok, thanks for the help. Last question, is there anyway I can swap in a new 3 way switch in the place of the old one?
get one of them kurdtz control plates, with a gibson style switch, and just disconnect the rest?
George Carlin.
#7
Posted 02 April 2012 - 09:09 AM
get one of them kurdtz control plates, with a gibson style switch, and just disconnect the rest?
This would work. Paul Rhoney made the one I used. You can find him by googling "Paul Rhoney Guitars."
IIRC a three way switch like the ones Mustangs and Jag-Stangs use are slightly longer than a two way switch and wouldn't fit. You would have to get a custom plate made for that. Paul could make that for you or one that works with a toggle. Mine with a toggle, looks like this:

DSC03246 by Hentai No Baka, on Flickr
Wanting to be someone else is a waste of the person you are. - Kurt Cobain
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users











