got the JAG TODAY !!!! YAY

stereohigh

OK It is sunburst, its great, sounds amazing.

a few issues though, number one a few fret buzzes, any help getting rid of them would be great, I am new to set ups

2. it came with two trems one with a screw ?, the other slots in. it seems a bit. the trem doesnt seem to have a lot of wobble, is this just how they are, it feels real low as well.

3. the lock that stops the trem , well it does`nt seem to lock the trem at all

any advice will be great, its going in next week for a set up and I really want it to sound good.

oh 1 last thing, can i change just the saddles on the bridge, allparts stock them.

cheers pete

http://www.myspace.com/grandunion come say hello, offer me help, and i will be a friend for life

dinosaur

this thread is useless wihtout pictures.

GeorgeF

Congratulations! You will not be dissappointed, just need to give it a little TLC.

1. I think you might need to adjust the height of the bridge. You can do that easilly by taking the strings off, pulling out the bridge and twisting the screws at either side of it (I don't have a proper tool to do it but I'm guessing you can screw it with a driver). Then you'll need to work out intonation which is piss easy.

2. I had to unscrew the trem system to have a good look at how it worked. For example, make sure the arm isn't all the way through til it's touching the body on the other side or you'll get no trem action at all. That might be why it feels so low anyway. Also make sure it's all screwed in properly and anything is not loosely clanging about.

3. 😡 Umm, I can't help you with that. Mine still doesn't work.

For parts I'd go to http://www.guitarpartsresource.com I think Rick told me about that place. Aweome.

So, that's how I've sorted mine out. Might be wrong. But mine seems pretty good.

dinosaur

2. it came with two trems one with a screw ?, the other slots in. it seems a bit. the trem doesnt seem to have a lot of wobble, is this just how they are, it feels real low as well.

3. the lock that stops the trem , well it does`nt seem to lock the trem at all

for the trem, put the trem lock on, and then turn the trem screw (the one in the middle) half way to meet the trem lock. its simple.

Fran

Well done pete...posd pics.

There's loads of set up info on here if you browse past threads in this section, but if you do get really stuck people will help. As far as i know you can just swap the saddles, but i just set the stock ones up and saved the money for a pup upgrade.