When I switch both pick-ups in the on position, my hotrails loses output. You would think its a phaseproblem, but... This is what I done withe the bridge hotrails:
red and white put together and taped of
green and bare together at the third position (bridge switch)
Black at the third position in the oposite way
The neck pick-up is original.
I tried switching polarity (put de black and bare wire together) in the third position on the switch and the green the oposite way. Seymour Duncan said that when combining their pickups together with fender that might help...That didn't help.
Put everything back in the normal way and switched polarity from the neck pickup. That didn't help either. What can be the problem here?
