Alright, so I wired it up like the picture. Now I get sound when the humbucker's switch is in the Neck position. I'm assuming this is the tapped hum because the bridge position seems to be out of phase, meaning the humbucker's coils are out of phase with each other. How do I correct this? I swear I used to know this... 😵 EDIT: Wait...that's easy, right? Just switch around the South Coil's wires? I'll try it. EDIT AGAIN: Maybe fixed? It's a little louder, but still quiet. Is that diagram for (Neck side) Hum--|--OFF--|--Tapped (Bridge side) rather than (Neck side) Tapped--|--OFF--|--Hum (Bridge side) as I was expecting it to be?
GFS wire colors are as follows:
Neck Side Coil North- Black=Start, White = End
Bridge Side Coil South- Green = Start Red=End
