Your Jazzmaster Pictures

spirograph

that

amazing.

amptcat

before and after pics of my SX Liquid, a cheapo jazzmaster-like guitar i got of rondomusic.com.

ARAMP1

It's been a while since I've been on this site, and I was just cruising around it and figured I'll show off this Fender Jazzmaster that I built for those that care. By built, I mean assembled out of parts. I started with a body and neck that I found on ebay.

I had to route out the pickup cutouts for humbuckers.

The whole cavity was lined in copper.

Here I am wiring it up. You can see my hand drawn wiring diagram here. The roller pots above the pickups cut out a coil of each one of the pickups so I can go from the full dual coil to full single coil and anywhere inbetween. The two position switch on the top horn switches between the normal tone capacitor and a distortion circuit.

I cut out stock Jazzmaster pickup covers to install the humbuckers. It's got a Seymour Duncan JB in the bridge and an overwound Gibson PAF for the neck position pickup. This guitar flat out SCREAMS!

Here's the finished product.

spirograph

good thinking! dont know why it hasnt occurred to anyone else yet, to do that with HBs.

ARAMP1

spirograph said:
good thinking! dont know why it hasnt occurred to anyone else yet, to do that with HBs.

Thanks. When I was a young kid and first saw a jazzmaster, I thought the pickups were humbuckers. After I became a bit educated on JMs, I always wondered why you couldn't just replace the stock pickups with HBs. As far as surface area of the guitar/pickguard, they fit great, but I had to take out a lot of material underneath so they'd fit down low enough under the strings.

spirograph

ARAMP1 said:
Thanks. When I was a young kid and first saw a jazzmaster, I thought the pickups were humbuckers. After I became a bit educated on JMs, I always wondered why you couldn't just replace the stock pickups with HBs. As far as surface area of the guitar/pickguard, they fit great, but I had to take out a lot of material underneath so they'd fit down low enough under the strings.

i dont suppose it really matters, as long as its not some bit of vintage guitar porn, and as long as you dont cut all the way through.

HNB

My new 1990's MIJ Jazzmaster.

DSC01742 by Hentai No Baka, on Flickr

Dropped a Mastery bridge in it and an AVRI trem. Probably going to order a mint guard for it as well. (Will keep the tort one just in case. 😀)

DSC01761 by Hentai No Baka, on Flickr

spirograph

nice. good consolation for losing two jagstangs?

HNB

spirograph said:
nice. good consolation for losing two jagstangs?

Yup, and a few other guitars. My sig should be shrinking a bit... 😁

spirograph

HNB said:
Yup, and a few other guitars. My sig should be shrinking a bit... 😁

probably a good thing! ive got too many guitars (for the size of my house) but i want more, i just cant afford it. really want a jazzmaster of some kind, but i might just have to settle for a silversparkle jagmaster my mate (who looks like you, oddly enough!) has said hed sell me.

HNB

spirograph said:
probably a good thing! ive got too many guitars (for the size of my house) but i want more, i just cant afford it. really want a jazzmaster of some kind, but i might just have to settle for a silversparkle jagmaster my mate (who looks like you, oddly enough!) has said hed sell me.

Nice! If you get it, post pics. 😁

gurleenkaur

NBarnes21 said:
Here's mine, it's a '08 AVRI with Curtis Novak JM-V and JM-90 pickups, as well as a Mastery bridge.

U KNOW IT IS DAMM SAXY....😀

HNB

Mint guard came. Just waiting on the Seymour Duncan Antiquity II's to come in. 😀

DSC01841 by Hentai No Baka, on Flickr

HNB

Got strings on. 😁

DSC01974 by Hentai No Baka, on Flickr

DSC01965 by Hentai No Baka, on Flickr

DSC01944 by Hentai No Baka, on Flickr

HNB

My other baby I call Lucy. Warmoth and AVRI Fender parts. Pickup Wizard pickups. 😀

DSC02045 by Hentai No Baka, on Flickr

HNB

Newest project. 😀

Locking Tuners

Adjusto-Matic Bridge

Custom Pickguardian.com Pickguard

Wide Range Humbuckers

Toggle and Volume Only

DSC02281 by Hentai No Baka, on Flickr

spirograph

thats amazin!

HNB

Just had a some pictures from a photo shoot sent to me.

407628_3043396887660_1345252598_3336225_1138837224_n by Hentai No Baka, on Flickr

379989_3043401007763_1345252598_3336226_826722428_n by Hentai No Baka, on Flickr

390351_3040053684082_1345252598_3335129_96025317_n by Hentai No Baka, on Flickr

389959_3043376087140_1345252598_3336220_2064489728_n by Hentai No Baka, on Flickr

403857_3043391367522_1345252598_3336223_901941409_n by Hentai No Baka, on Flickr

399576_3043404407848_1345252598_3336227_874527009_n by Hentai No Baka, on Flickr

403762_3043414448099_1345252598_3336231_2048370453_n by Hentai No Baka, on Flickr

400550_3043410688005_1345252598_3336230_992585767_n by Hentai No Baka, on Flickr

Mad-Mike

Been rocking my home-built Jazzmaster (from the start of this thread) for goin' on 2 years now. Recap of specs....

- WD Ash Jazzmaster Body

- Pickup Wizards Pickup (bridge), Fender AVRI Jazzmaster pickup (neck)

- Tommy's Custom Bodies and necks Neck

I built this thing in my Studio Apartment, there's even a build thread on OSG and might be one here too.....

Art Show Gig

And the band behind was the whole start of me wanting a Jazzmaster in the first place

And speaking of The Cars.......

badmotorfinger

ARAMP1 said:
It's been a while since I've been on this site, and I was just cruising around it and figured I'll show off this Fender Jazzmaster that I built for those that care. By built, I mean assembled out of parts. I started with a body and neck that I found on ebay.

I had to route out the pickup cutouts for humbuckers.

The whole cavity was lined in copper.

Here I am wiring it up. You can see my hand drawn wiring diagram here. The roller pots above the pickups cut out a coil of each one of the pickups so I can go from the full dual coil to full single coil and anywhere inbetween. The two position switch on the top horn switches between the normal tone capacitor and a distortion circuit.

I cut out stock Jazzmaster pickup covers to install the humbuckers. It's got a Seymour Duncan JB in the bridge and an overwound Gibson PAF for the neck position pickup. This guitar flat out SCREAMS!

Here's the finished product.

is that considered to be an anodized gold pickguard?

« Previous Page Next Page »