Guitar shops around here take forever to get things done, recently during a truss rod adjustment, I figured I'd take off my pick guard and straighten out the neck pup...kinda bashed down the magnets on accident, so I wanted to pop em back up, however, unfortunately I snapped one of the soldered wires from where it was soldered...where, I'm not sure, but maybe you know!
Ah, soon after I took this picture, about 15 minutes before this post, I broke the black one (shown next to the white one) too...I looked at iCey's schematics, but that doesn't really help without a full view of what I'm looking at, that or I'm just not reading close enough.
JS kinda cuts off the edge of the photo, (white one cut off at the right is the wire I'm referring to and the black one next to it) but you understand what 2 wires I'm talking about, a drawn picture on paint would be good enough for me s'long it indicates what wire is what and what switch its going to and onto what metal piece it's touching, yeah, you know, specifics are a blessing in disguise when it comes to such things.
