To be honest, no. But I have found that the 24 fret necks off 'metal' guitars have exactly the same measurement. If you were to trim the heel to fit, the guitar would intonate perfectly. However, to fit a strat neck you would need to move the bridge back over an inch or so - probably an inch an a half, which is more hassle than its worth as you'd need to fill and repaint the whole thing to make it match. Or you could extend the neck pocket, which to me seems impossible.
I'm not at all sure of the widths of the heels of the two different necks though, so I think you'd be best getting one of these, and trying to cut a more fenderish shape out of it, or even add on wood, and make a proper fender style headstock and refinish it:
http://store.guitarfetish.com/rst24frneprf.html
EDIT: You're a lefty 😛
Well you could go out and get a squier stagemaster neck then, as they are fender style reverse headstocks which have 24 frets. You turn that the right way round and you have yourself a fender neck with 24 frets. You will still have to modify the heel on that though.
