Bought a jaguar hh a year ago and I love it. I traded out the dragsters for a set of sd rails (hot rail bridge, vintage neck). The rails are angled and they sound great. The dragsters were, as you probably know, only two conductor, so in the spirit of not confusing myself, I wired the rails in with no coil-tap. I changed the audio pots to 500k and that was that. A little time has gone by and I want to attempt the coil-tap plus a few other ideas. I have to admit that I'm a bit of a maniac when it comes to "Frankenstein-ing" my instruments. So below is a summary of what I'd like to do... - if my inexperience with wiring is evident here I'll kindly ask you to overlook it 😀
I want to replace the 500k audio pots with stacked concentric pots. I want one stack to control volume and tone for the bridge and one to control volume and tone for the neck. I also want to change the mid-cut switch (the switch closest to the output) to coil-tap both pickups.
Thoughts, questions, flaming fruit... Send 'em my way...
