Moody Tuner said:
Mad-Mike: You have the tuners listed in your Jag-Stang registry as the KFT-3085 model. Are those the CL's with H mount mounting style? If not, which ones are they? Were you able to just drop them in or did you have to drill the headstock? I'm looking for tuners that I can just drop into the Jagstang (with highest gear ratio I can get) and not have to drill into the headstock. I also have a Vista series Jagmaster and the tuners look identical to my naked eye, to the ones on the Jagstang, so I'm thinking I could replace the tuners on both of the guitars with the same replacement set, without modification.
Thoughts? I appreciate your insight, you seem to be a Jagstang expert!
Close, if your Jag-Stang's peghead holes are stock (un-widened) then you will probably want to use the below
KTNC-3805NL Those are the ones that are on my reissue Jaguar. They have the press-fit bushings.
the KT-3805CL is what my Jag-Stang, I need to correct that (it has Schaller style collars with bolt bushings, and they are H-mount, not F mount) as I put Schallers on the Jag-Stang at one point when the original tuners started falling apart (I used them a lot, that guitar was in 1 step down, 1/2 step down, CGDGBE, DADGBE, and EADGBE quite frequently).
