Jump to content

SynapticGroove

Members
  • Posts

    15
  • Joined

  • Last visited

SynapticGroove's Achievements

Newbie

Newbie (1/14)

0

Reputation

  1. The stock ones are Ping and they are extremely poor quality. These are the vintage tuners that I have on my Fender EOB strat and I would recommend them: Fender American Vintage Guitar Tuners w/Logo
  2. A RoadRunner case from Guitar Center will do the trick. It's not as nice as, for example a TKL, but it's still solid. Around $100.
  3. Has anyone tried these on their Jag-Stang, or something similar: https://reverb.com/item/14384085-kluson-black-revolution-6-in-line-locking-tuners-no-collar-requires-11-32nds-holes-ktncl-3805bl I've got some beefy tuners on my '94 Parker Fly that are locking and I'd really like to get rid of the factory-installed Ping tuners for something more solid with a better ratio. Locking are a plus.
  4. Hola all, I've been lurking for 6 years and finally stumbled across the opportunity to pick up a first run Jag-Stang yesterday. She's unmodded and a beauty to boot! With all my gear acquisitions, one of the first things I do is a deep clean and a re-string. When I took the neck off, I found some stamps, on both the neck and the body: JT-95 & T-95EX Does anyone have any clue as to what these mean? Any/all insight would be greatly appreciated!
  5. Thanks for the welcome! Devi Ever's gear is right up the 8 bit crushed fuzz alley. : ). I've lurked for a little while and have always been a fan of Mustang's/Jaguar's. Thought I'd take the plunge! Thanks again! Benjamin
  6. This is certainly doable, but you might get some noise issues. I've known guys to take a 3 humbucker LP and run individual volumes with a common ground and then an overall master volume to blend the middle pickup. It's great but noisy. Let me knock some work out and I'll shoot you a schematic!
  7. Spirograph, There certainly should be a way to get more feedback from it. A lot of it will depend upon whether the pedal is SMT, digital, digital/analog hybrid or through-hole 100% analog. I'm familiar with Rocktron, but not this particular unit. Is there anyway you could snap a shot of the pcb? If it's limited by a gate or a potentiometer value, you could certainly get more feedback out of it. Through-hole boxes are the simplest to tweak due to the ample pad space and usually relatively large traces inherent in that design. SMT can get tricky because of the need for a hot air rework station. Digital can be done, but usually involves replacement or programming of a microprocessor. Think arduino. ; ) Hope this helps a bit and shoot a pic of the inside if you can!
  8. Are you wanting to control the volume of each pickup independently of one another and then have a master volume for overall mix?
  9. Hello everyone! My name is Benjamin and I am a designer at Keeley Electronics, a renowned effects pedal manufacturer. I've played Fender Mustang's and Jaguar's for years and grew up during the formative time when Nirvana was changing the face of modern music. Some of my favorite bands include: My Bloody Valentine, Radiohead, Can, Other Lives, etc. My background in music is inextricably linked with a passion for electronics. I've had the pleasure of designing and modding some of the coolest gear in the world. As such, I'm humbled to be a part of a stellar community and I am entirely at your service for any technical questions, mod suggestions or product information! Shoot me a line if you have any questions at all! Cheers! Benjamin Keeley Electronics www.rkfx.com
  10. Hello everyone! My name is Benjamin and I am a designer at Keeley Electronics, a renowned effects pedal manufacturer. I've played Fender Mustang's and Jaguar's for years and grew up during the formative time when Nirvana was changing the face of modern music. Some of my favorite bands include: My Bloody Valentine, Radiohead, Can, Other Lives, etc. My background in music is inextricably linked with a passion for electronics. I've had the pleasure of designing and modding some of the coolest gear in the world. As such, I'm humbled to be a part of a stellar community and I am entirely at your service for any technical questions, mod suggestions or product information! Shoot me a line if you have any questions at all! Cheers! Benjamin Keeley Electronics www.rkfx.com
×
×
  • Create New...