Catasphere 0 Posted April 3, 2010 Report Share Posted April 3, 2010 Hey guys, I have a MIM Fender Classic Play Jaguar HH, and I replaced the stock enforcers with the SH-4 and SH-2n set, but the Guitar Center tech told me that the two roller switches that coil tapped the pickups and used to blend them, aren't functional with these pickups. Is this true? If not, how do I wire them myself? This is the tricky thing, because it's one of the Fender Classic Player HH Jag's, all the circuits are different. The roller switches on THIS particular model of jag are actually coil tap blend switches, so you can blend the way you like it. Thus, there is no wiring diagram for these on the Seymour Duncan website. Quote Link to post Share on other sites
diego 0 Posted June 2, 2012 Report Share Posted June 2, 2012 I hace te same situation. In the rithymn position i hace no sound. What should i do? Sorry if my english is not good enough. Quote Link to post Share on other sites
HNB 56 Posted June 3, 2012 Report Share Posted June 3, 2012 That tech is likely full of crap. This page has a diagram on how to wire a blending pot. Humbuckers are basically two single coils wired together. As long as you have four wires plus the bare ground, you should be good. Blending pot diagram. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.