Jump to content
  • Similar Content

    • By Mich_pt
      Hey, everyone!
      I'm new to this forum and one of the reasons why I joined in is because I recently traded up a Fender Mustang Player and got an American made that's supposed to be a '75 all original and it does look that way. But I can't seem to find that much info about it with the serial number so I was wondering if any of you could help me gather some bits of info about the specs like neck measurements, the pups it might come with and so on. The serial number is 621987 and it's on the neckplate right above the big "F" logo that I believe is from the CBS era. All I was told is that it's all original and that it was made in 1975 in Fullerton, USA. 
      I would very much appreciate your help and I'm very excited to share this new baby with all of you
    • By ps___093
      I am routing it to fit Humbuckers,  (SH-4 JB Bridge Humbucker & SH-2 Jazz Model Neck Humbucker)
               changing the bridge to a Mustang one, or something better ( happy to hear any recommendations ) 
                I’ll be using CTS 1 MEG pots for volume and tone, as well as the Orange Drop Capacitor .047uf        ( hopefully this will give it a nice bright tone ? )
            will try and make the top switch a Parallel & Series switch, as well as having the coil splits on the bottom switches.. 
            
               I’d love to hear your opinions on the materials/parts i’m planing on using, and if you have any other suggestions please let me know!

    • By Alldatjazz
      Hello everyone thanks for reading. I recently came across a Mustang that is supposedly a 1982, but it's very difficult to find info on these years. Can anyone tell me some tell-tale signs? I have a few pics of it that I will attach. 
      Serial: R018034 . Theres conflicting info on this. According to a mustang history page, that means it's 1982, but according to a decoder, it's a 2004 reissue?
      I can't figure out how to upload pics through here? So here's a link to the imgur gallery
      https://imgur.com/gallery/jNs2yUg
      If anyone can help, that'd be awesome and I'd really appreciate it.
       
    • By Kuub
      Hi guys!
       
      I've got a Fender mustang competition from 1972.?
      When I bought the guitar there was no tremolo arm.
      I bought a new one online, which fits on a '65, but it doesn't fit.... (https://www.thomann.de/nl/fender_mustang_tremarm.htm)
      I measured the parts: the tremolo arm is close to Ø5mm (around Ø4,95mm), the bridge hole is around Ø4,7mm.
      Is the hole size correct, or should it be Ø5mm? Or do I need a thinner arm?
       
      Hope someone can help me.
       
      Greetings,
      Willem
×
×
  • Create New...