Jump to content


  • Similar Content

    • By Jet
      So, I am trying to build a mustang with the same specs that Kurt's had at the 1993 show at the Roseland Ballroom. I was wondering if he used at JB JR, Hot rails or did he just use a JB Humbucker?
    • By kpac_n_bass
      Hello everyone
      I have a squier jaguar with duncan designed sensors.
      I want to make a cheap mod pickup.
      I want to replace the stock magnets with alnico 5 or alnico 2.
      Tell me whether it is worth it to do?
      Is there a difference in the diameter of the magnets of the stratocaster pickups?
    • By OperateTheMutant
      Long story shor: I was replacing the stock "Duncan Designed" pickup covers and switching them for Fender Aged White ones. To my surprise the stock pickup covers were glued on. The neck pup cover came off without too much trouble, however, the bridge pup was damaged in the process. I took it to my local tech and he says the coil is damaged and recommends getting a new pickup vs rewinding them.
      Honestly the stock bridge pup (Model JM-101B) was just a little to shrill for my personal taste. I could get an ok tone when rolling the tone knob down but then switching between pickups is a pain in the ass because the neck would be really super muddy. I love the stock neck pickup (Model: JM-101N) My question is: Is there another pickup anybody can recommend that is just a tad mellower without having a big difference in output? I'd like to keep the neck pickup if I could. I've been trying to compare and contrast online but can't really find any spec info on the JM-101B and JM-101N vs other models. All I know is they have Alnico 5 Magnets.
      Can anybody help with this topic? Any advice would be great.
    • By hostileto
      Everyone I'm trying to rebuild the Jagstang if it were to have the best parts.
      A Jagstag we wish they would make
      This is what I have done so far
      CTS Left Handed 250K Audio Pot          
      Switchcraft White On-Off-On Slide Switch          
      Copper Shielding Tape          
      Cloth Wire Kit          
      Switchcraft #11 Gold 1/4" Input Jack          
      .047 MFD 600V Orange Drop Capacitors
      Real Texas single Special pickup USA
      dimarzio pickup H-8
      the last thing I need to do is get and I don't have is
      real mustang knobs (the ones that come with are too small and dont fit the pots shafts)
      String guide
      I will a get a pro to do the set up below
      Mastery Bridge (i have to order)
      Bone nut
      Right now
      its heavier but feels more solid than a practice toy guitar it was
      way more sustain with the 8 h pickup
      did a record compare with old and with this new set up. Surprised diff was in the bottom and not the top
      Its sounds warmer not so harsh. Clean is super clean
      You can see diff in size orginal to CTS left pots
      I bought a new lefty pick guard from a  guy who makes them in England and sells them on ebay
      its 3 ply vs 2 ply from Japan so its nicer. Fits perfect.
      Big cap.... Its pretty tight in there..whew!
      Wondering if I wired this wrong as I copied the orginal and the pots were right handed. These are lefty so the vol rolls very fast
      Copper shielding----- No humming at all
      Tell me what you think?
      Its been a pet project as the lefties are so rare.
      This is a cork sniffer Jagstang as there is no dings or scratches. I paid top for it as it was not like new but put in a closet and left there for years. The one thing its not is MIJ is CIJ 96
      tried to put the images but said  I couldnT?
  • Create New...