Hello, I have a telecaster (Phil pro) neck and a mustang floating bridge, pickups, etc. I want to make a DIY good looking jag-stang but I don't know where can I get blueprints with scale. Help to figure out!
By Dalton R
Obligatory new to the forum post, here. I just picked up my 2002 Fiesta Red Jag-Stang on Friday of last week, and I'm head over heels in love with this instrument. However, I seem to be having some tone issues. For reference, I am running my Jag-Stang through a beat up Marshall DFX 100, a You Dirty Rat pedal, Nu Tube Screamer, and a Rusty Fuzz pedal. The JS has a Texas Special and an SH-4 JB in it, so my tone should be perfect, but everything sounds too bassy and muddy. Distortion doesn't really offer the crunch that I really want through this guitar like it does with my Fender Duo Sonic. I've tried messing with the EQ on my amp and lowering/raising the pickup heights. I'm kinda running out of any ideas, and any help would be appreciated!
Hey ya'll, new member here but I'm in a bind. I'm looking for the screws to a jag-stang that my buddy has in his possession. It's got some work that's gotta go into it, but most importantly is I'm missing the screws for adjusting the bridge height for the action. The pic shows the ones I'm missing.
Any of ya'll know where I might be able to find the screws? If not, what are my options for this?
Thanks for any help!
Hi, so I’m a wiring noob and needing some help with the wiring I have in mind. I’m upgrading both pups in my JS. In the bridge I’m putting in a Seymour Duncan P-Rails, and in the neck a Lace Chrome Dome (or DiMarzio Area 67). (Two slide switches and Tone and Vol.)
What I want to be able to do if possible is wire the neck switch to toggle between the neck/neck+bridge(parallel)/bridge. The bridge switch I want to wire to split the p-rails, rail/humbucker(series)/p-90.
So, what I need is a diagram if possible and some advice about the switches. I assume i’ll need two 3-way on/on/on slide switches?
Any help is greatly appreciated.