Hey all, I've had my HH Special for a few years now, and I love everything about it, except for the lack of clarity in the pickups.
So I've bought a set of Seymour Duncan 59/Custom Hybrid humbuckers. Only issue is, the Fender Dragster pickups that were in the guitar have a thick cable which terminates by splitting into a single output wire, and a bare ground wire. Whereas the 59s terminate by splitting into a red, white, green, black and bare wire.
Do I need to just solder together and tape off some of them?
Also, the Dragsters are soldered to their pickup covers, but the 59s don't have covers, does this mean I need to find another way to ground them?
Thanks in advance
Hey brothers and sisters,
I have a new KC jaguar. I managed to change the humbuckers height (both) by accident when removing my scratchguard cover. Has anyone heard of the standard Fender settings for these? For example how much should I be able to measure (in MM if possible, sorry USA!) FROM the bottom of my strings to the pickups.
Thanks so much!
I have a squier jaguar with duncan designed sensors.
I want to make a cheap mod pickup.
I want to replace the stock magnets with alnico 5 or alnico 2.
Tell me whether it is worth it to do?
Is there a difference in the diameter of the magnets of the stratocaster pickups?
I'm soon getting a squier vintage moddified mustang and I'm planing on routing it for a humbucker in the bridge but how would I know exactly where to put it? So that it would be the right tone and aftermarket humbucker pickguards would fit it? Please help.