Hey ya'll, new member here but I'm in a bind. I'm looking for the screws to a jag-stang that my buddy has in his possession. It's got some work that's gotta go into it, but most importantly is I'm missing the screws for adjusting the bridge height for the action. The pic shows the ones I'm missing.
Any of ya'll know where I might be able to find the screws? If not, what are my options for this?
Thanks for any help!
it's about my beloved 1995 Jag-Stang...
I managed to swap stock humbucker with DiMarzio DP100. As I hoped sounds are way better !
To solder my DP100, I used the attached wiring diagram. It's kind of good but not perfect.
With this diagram, switches works almost as expected, except with switch 1 on bridge position + switch 2 on series position, which works as "off pickup position" (no sound).
I want to use this "off position" to make "out of phase" sound (all other positions have to stay "in phase"), but I can't find anywhere how to do.
Any help can bee provided will be greatly appreciated :)))))))
Thanks for reading.
I want my SSS Strat to sound more like a jaguar as I'm lefty and can't afford a Kurt Cobain Jaguar. Any advices?
Ive decided that i want to drop my guitar down a bit. Its a strat copy ive moded and at the moment it has 10s on it but i want to put a set of strings on it that will work well with drop d and drop c but i dont know what to use also if my guitar will need any major ajustments.