Yes (see notes)
EMG-81 (active) humbucker in the bridge-position, EMG-SA (active) single coil in the neck-position. Added EMG-Pi2 (phase inverter) internally to restore some of the original functionality of the 3-way pickup selectors (in phase/out of phase), I had to cut off the top of the EMG-Pi2's toggle switch in order to squeeze it into the cavity and set the toggle to be always "ON" and then use the neck-position switch to take it in and out of the neck-pickup's circuit before the pickup selector. I used a custom wiring diagram created by https://www.youtube.com/user/creepingnet UPDATE bought new pickguard, red 3-way selectors, red EMG-81, red EMG-SA which I sent to madhatterguitarproducts.com to have them wire me a harness based on the custom diagram. Previously had a crafted bone nut made, and replaced the tuners, and bridge saddles. Slight mod with a spring under the string tree to raise it and relieve some tension. I've also carved out a logo of comic book character Deadpool into the body.